DataDisplay Support

Dear Alex, I have installed the thermocouple inside my car and the car of my friend. I list here the problems: 1. my car, F30, N20, (AK01C version) I found the option to enable the exhaust gas sensor, but first I can't see difference in the temperature value showed respect to the option disabled (Th...

Dear Alex, no, I can see the sentting for the oiltemperature sensor,and it works, but I don't find the setting to enable the exhaust temperature sensor. Regarding the railpressure yes, consider that some N47 version can reach also 2500 bar of pressure. It is a diesel engine, so the railpressure is v...

Dear Alex, I have installed the exhaust temperature sensor for N47 engine, but I can't see the settings in the feature page to enable this measure. Indded the engine oil temperature sensor is ok. The second issue is on the limits page. I want to monitor the rail pressure if goes under 1950 bar, but ...

Thank you Alex, yes it is very helpful!

I understand, in my case one sensor in enough! Let me know when you find the solution!

Hi Alex, do you have some news on wirings?

Dear Alex, I install the display in a BMW E87 with N47 engine and manual transmission. In the custom page where you can select three parameter to show with the bar graph, I can customize it with only some parameters respect to the list available in the custom page where 8 values are displayed in num...

Hi Alex, I want to install the exhaust thermocouple on an E87. The display unit is the AK01E V2 and not have the connections indicated in the first post. How I can connect the MAX 31855 to the display module? I see on one side 0V and 5V for the power supply but for the CS D0 and CLK signals? Thanks ...

Hi Alex, thanks for your reply... very easy solution to the startup warning of the oilpressure!

Regarding the other question? Is it possible to improve the alarm limit screen showing also the value of the parameter that goes out of limits?

Cheers!
Alberto

Hi Alex, first Happy New Year! I want thank you for this last update that solve the problem with my N20 motor. I'm on the last firmware version and I would like to improve the limits functionality. I set a limit on the exhaust temperature, and another limit on the oil pressure. Since during startup ...