DataDisplay Support

Dear Alex, I confirm that using the N13 setting the values are correctly shown! I think you will insert the correction in the next update of the display firmware. I'll waiting for them.

Dear Alex, as stated in the manual, In order to carry out a diagnosis on the vehicle or to be able to connect a tester to the OBD2-Port, the DataDisplay must be disabled/locked. In this mode, if I understand correctly, some CAS informations are locked as anti-theft purpose. It's right? Since I want ...

Thanks Alex,
yes, they are very cheap, but for this reason I have doubt on their quality (they are all chinese ), and I'm afraid it can create problems to my turbine if it melts and lost some pieces of metal
Anyway I'm searching some good quality brand. Thanks for the reply.

Dear Alex, thanks for the support. I have the picture of the info screen. This evening I'll try to use N13 motor in the settings and I'll give you a feedback as soon as possible. Then if it is not enough I can also test your hex modded file.

AK-Motion hat geschrieben: ↑Di 23. Aug 2016, 17:24 Wichtig hierbei, es sollte ein Temperaturbereich von 1350°C abgedeckt sein, also z.B. -100°C bis 1250°C.

Viele Grüße
Alex

Hi Alex, it is very hard to find a thermocouple with those characteristics. Instead I found different models with range 0 - 1250°C. Are they suitable for the measure?

Hi, I have installed the data display in a F30 328i with N20 motor and manual transmission. I select the english language since italian has some bug and is not very good translate from the original language. As showed in the picture, in the car status screen, only the lambda value is displayed and s...